There are several types of cable tray installation

There are several types of Cable Tray Manufacturers installation: installation along the roof, horizontal and vertical installation along the wall, installation along the shaft, installation along the ground, installation of fiberglass tray and pipe bracket along the cable trench, etc. 
The bracket (hanger) used for installation can be finished or homemade. 
The main ways of fixing the bracing (hanger) are welding embedded iron parts and fixing with expansion bolts. 
Where there is a cable, there is a bridge. 
Bridges are widely used in a variety of industries. 
They are mostly used in data centers, offices, Internet service providers, hospitals, schools / universities, airports, factories, and so on. 
In particular, the data center and IT computer room market will be a very large part of bridge applications in the future. 
The cable tray should take measures to prevent cable scratches. 
For example, all kinds of elbow, tee and four-way joints should be arc-shaped, and the cable pull-down device should be used. 
When the Cable Tray Manufacturers enters the room from the outside (such as a substation), it should be sealed, and fireproof sealing and sand sealing can be used. 
At the same time, the FRP bridge should be tilted outward, with a general slope of 1%, to prevent Rain Water from pouring back. 
Cable tray, 1. 
The level is improved, 2. 
Horizontal hanger, 3. 
Vertical installation